Product description:
Model: PS-2000W
· 2000 Watt continuous pure sine power
· 6000 watt peak power
· Built in smart battery charger with 7 selectable battery type settings
· Auto gen start feature.Multi Stage Smart charger 70 Amp
· Marine and industrial grade
The 2000 watt 12 volt low frequency Power inverter charger transforms DC (direct current) power, stored by batteries, into AC (alternating current) electricity that can be used to run your various tools and appliances. This inverter also has a built in AC-to-DC battery converter charger, which allows users to recharge their battery bank from an AC source such as a fuel-powered generator, shore power or a regular outlet at home. The built in battery charger features a seven type battery selector and 4 stage charging, for safely and effectively charging your battery source. Use this product for renewable solar, off-grid, mobile and emergency backup power applications anywhere that uses 110 or 120 volts of alternating current.
Product Features for PS-2000
2000 watt low frequency inverter
6000 watt surge 300% surge capability
DC input and Ac output totally isolated design
High efficiency 88%--90%
Inverter power saving mode
AC/Battery Priority Selector
Terminal Block
Multi Stage Smart charger 70 Amp
Remote LED display and the RJ11 standard interface available
8msec typical transfer time
Selectable 25W power save mode (hibernation)
7 battery type settings for charger
Containing 4-step charging modes, charging current automatic adjustment
Multiple protection functions over-current, overload, output short circuit protection etc.
Inverter Output Specifications:
Continuous Output Power: 2000 Watts
Surge Rating: 6000 Watts
Output Waveform: Pure Sine/Same as input (Bypass Mode)
Output voltage: 120VAC±5%
AC Input voltage range: 90~135VAC
Power factor: 0.1~1
Nominal Efficiency: >88% (Peak)
Line Mode Efficiency: >95%
Output Frequency: 50Hz +/- 0.5Hz / 60Hz +/- 0.5Hz
Typical Transfer Time: 10ms (Max)
THD: < 5% DC
Ambient operating temperature: -4°F to 122°F (-20°C to 50°C)
Input Specifications
Nominal Input Voltage: 12.0Vdc
Minimum Start Voltage: 10.0Vdc
Low Battery Alarm:10.5±0.3VDC
Low Battery shutoff: 10.0±0.3VDC
Low battery Trip: 10.0Vdc-10.5Vdc
High Voltage Alarm: 16.0Vdc
High Voltage shutoff: 16.0±0.3VDC
Idle Consumption: 28 Watts
Charger breaker - 20 amps
Power Saver Mode Idle Consumption: 10.0 watts
Charger Specifications
Output voltage: Depends on battery Type
Charger Rate:70A
Over Charge Protection Shutdown 15.7V
Selectable Charge setting based on battery type
Adjustable charge current off-40%/60%/80%/100%
Four Stage Smart Charger
Transfer Switch Specifications
30 amp auotmatic transfer switch
8 ms (max)
Dimensions
Unit Weight: 42 lbs.(19kgs)
Unit Size L x W x H: 18.83 x 8.67 x 7.10 inches (48x22x18cm)
Shipping Weight: 53 lbs.(24kgs)
Shipping L x W x H : 23.62 x 13.39 x 12.99 inches (60*34*33cm)
Basic datasheet for Pure Sine Inverter Charger 12vdc 120vac 2000w
| Model | PS2000-112 |
| Output power | 2000W |
| Impact power | 6000W |
| DC input voltage | 12VDC |
| Output voltage | 120VAC±5% |
| Output frequency | 50/60HZ±0.5% |
| Output wave form | Pure sine wave ( THD< 5 % ) |
| Power factor | 0.1~1 |
| Max efficiency | 88% |
| Standby power loss | <10W( Saving power mode ) |
| Switching time | <8ms |
| AC Input voltage range | 90~135VAC |
| DC Input voltage range | 10.0~16.0VDC |
| DC charging current | 70A |
| Fault indication | LED red |
| Remote switch (optional ) | RJ11-LED or RJ45-LCD |
| Work temperature | -20~50℃ |
| Working humidity | 20~90%RH |
| Storage temperature | -30~70℃ |
| Cooling way | Temperature controlled cooling fan |
| Net Weight(kgs) | 42 lbs.(19kgs) |
| Product Size(cm) | 18.83x8.67x7.10 inches 48*22*18(L*W*H) |
| Applications | Caravan, motorhome, camper,Car, yacht, solar energy systems, mobile devices, industrial control, power tools, Home Office etc. |
Copyright © Suzhou Maili Electrical Appliance Co.,Ltd. All Rights Reserved. | Sitemap
